Parting Urethane Parts
Tools that work well for parting are .060″ to .100″ (1.524 to 2.54 mm) wide with a 20 to 30 degree front rake and no top rake. A small 3/64″ radius is ground into the top of the tool. Starting on the cutting edge, some side clearance is helpful. Three to five degrees is all that is usually needed.
The proper tool, feed and speed allow the chip to exit the cut with little resistance and heat buildup. Parting yields a good surface finish and is a useful variation for facing certain urethane parts.
Why Choose Gallagher For Your Cast Custom Urethane Needs?
Continuous Advancements in Polyurethane Expertise and Equipment
Bring Gallagher even the trickiest requirements of your most important components, and time after time, we turn them into success at our 100,000-square-foot, ISO-certified facility in Gurnee, Illinois. Meanwhile, as your demands keep getting tougher, we’re always reinvesting in our business, constantly enhancing our expertise and continuously improving our operations with new machinery, new processes, and new materials to meet your evolving needs. It’s all part of a culture of commitment to your needs that you’ll find only when you partner with Gallagher . . where you can be confident that you’ll always have your toughest demands – delivered.